Because paint correction is actually a process that removes defects from your vehicle’s clear coat and not the paint itself, general surface scratches that have not broken through to the paint are the most severe defects that can be corrected. However, we can also correct swirl marks, stains, micro-marring, and etching to give your vehicle a leg up in more ways than one! For chips in your paintwork, we have a specialty add-on exterior detailing service that will effectively correct those errors; however, heavy body damage is not something we remedy.

Paint correction is usually only a one-time-only fix and is not recommended to be performed repeatedly like interior or exterior detailing. Therefore, avoiding future surface stains or fading caused by UV degradation is something that can be accomplished with the installation of a SB3 Ceramic Coating package right here at Shining Rides Detailing! We do our best to prepare your vehicle for an adequate defense against whatever daily driving in Plum, Pennsylvania may throw at it.

While you may not think about it, even brand new vehicles can have defects in their clear coats left behind by hazards or debris they experienced at the dealership. Whether it is light scratching, clear coat scrapes, stains from acid rain, or swirls from abrasive scrubbing, paint correction will eliminate them and thus improve the gloss and clarity of your new automobile’s finish. We are not an auto detailing shop only suited for the worn and torn automobiles - All are welcome with our paint correction packages.

Essentially, our automotive paint correction process begins by cutting the surface of your clear coat using compounds and light abrasion. This levels the clear coat so all defects disappear. Then, we buff the surface to both eliminate any haze left behind during the cutting phase and make it nice and smooth in the area where the defect previously was. Finally, we polish the surface to exceed the gloss and shine that your automobile had previously, also removing any remaining defects.